Khi thế hệ truyền dẫn HDBaseT tiếp theo đáp ứng nền tảng trình chuyển đổi trình bày của WyreStorm, kết quả là bộ truyền chuyển mạch mạnh mẽ này sẽ ra đời, hoàn hảo cho môi trường lớp học và cuộc họp công ty. Tự động chuyển đổi đầu vào với phần mở rộng máy chủ USB và kích hoạt CEC mang lại trải nghiệm tự chủ mà không cần người dùng nhập liệu.
Wyrestorm SW-510-TX 4-Input 4K HDBaseT Switcher with USB
SW-510-TX When the next generation of HDBaseT transmission meets WyreStorm’s presentation switcher platform, the result is this powerful switching transmitter, perfect for corporate meeting and classroom environments. Automatic switching inputs with USB host extension and CEC triggering mean an autonomous experience with no user input required.
4-INPUT SWITCHING EXTENDER
A flagship in our PRO range and a first for our switching extenders, the SW-510-TX brings a wide range of premium features into one powerful meeting space solution. Supporting USB routing to both HDMI and DP inputs, this extender accepts HDMI, DisplayPort and USB3.1c sources with a VGA +audio input for legacy devices. Additionally, the SW-510-TX adds support for 4K content and HDCP 2.2 protected content.
ADDITIONAL RECEIVER INPUTS
When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.
CONDITION-BASED RELAYS BUILT INTO RX
With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.
USB 2.0 PASS-THROUGH
HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.
AUDIO & VIDEO
1x VGA In: 15-pin VGA
1x Display Port In: DisplayPort 1.3
1x HDMI In: 19-pin type A
1x Audio In: 3.5mm (1/8in) TRS Stereo
1x Line In: 3.5mm (1/8in) TRS Stereo
1x HDMI Out: 19-pin type A
1x HDBT Out: 8-pin RJ-45 Female
HDBaseT™ Class C
Encoding Data Rate
End to End Latency
10μs (micro seconds)
2ch Analog/PCM | Multichannel: LPCM
Video Resolution (Max)
1920x1080p @60Hz 8bit
1920x1200p @60Hz 8bit
3840x2160p @60Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:2:0
DCI | RGB
Maximum Pixel Clock
COMMUNICATION & CONTROL
HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB
1x RS-232 (Control): 3-pin Phoenix | 1x RS-232 (Passthrough): 3-pin Phoenix
2x 8-pin RJ-45 female | Bidirectional over HDBaseT™
1x IR RX: 3.5mm (1/8in) TS Mono
1x USB-C: USB 3.1 Audio/Video2x USB Host: USB-B | 3x USB Device: USB-A
12V DC 2A
Max Power Consumption
- Professional switching transmitter for education or corporate meeting rooms
- Automatic or manual switching between HDMI, VGA, DisplayPort and USB-C inputs
- Bidirectional USB2.0 for connection of webcams, smart touchscreens and microphones
- USB-C input supports Alt-mode functionality for AV and USB device connection through a single cable
- Automatic or manual CEC triggering for compatible connected screens or projectors
- Supports source content up to 4K/60 4:2:0 with HDCP 2.2